ENERGENIX

Standards

The standards behind the mark

Approved members are audited on paperwork, workmanship and aftercare. A household hiring a member should get the same baseline wherever they are.

Energenix Approved mark
01

Documented survey before quote

No specification issued without a recorded fabric and heat loss assessment. The survey record must state the assumptions used — U-values, air change rates, design external temperature — and be handed to the client with the quotation, not kept internally.

02

Named competence per trade

Current certification held for every measure a member offers, checked annually. Competence is recorded against a named individual, not the company, and work outside that record is outside the scope of the mark.

03

Twelve month aftercare

A follow-up visit or call, with a route to Energenix if it is not honoured. For heating systems the follow-up includes checking the system is running at its design flow temperature rather than one the client has turned up.

Worked example

What "designed, not guessed" means

A compliant heating design states the flow temperature it was sized for and shows emitters capable of the room loads at that temperature. Where the fabric cannot support a low flow temperature, the quotation says so and prices the fabric work rather than quietly raising the temperature.

The audit looks for that arithmetic on one completed job, with the client present.

Schematic of a low temperature heat pump system: outdoor unit, header, cylinder, upsized emitters and underfloor manifold with flow and return temperatures marked
Diagram of a solar PV and battery installation showing array, inverter, battery, consumer unit, export meter and grid connection

Generation and storage

Yield figures the client can check

Generation estimates must name the method and the assumptions — orientation, pitch, shading, degradation — and separate self-consumption from export. Battery payback figures state the tariff they depend on.

Members must not present a best-case year as a typical one.

If a member falls short

Raise it with the member first. If that does not resolve it, write to complaints@energenix.org.uk. We acknowledge within five working days and a panel drawn from outside that member's county hears the case. Sanctions run from a corrective action plan to withdrawal of the mark and removal from the directory.

Our complaints procedure does not replace your statutory rights against the member under the contract you hold with them. Read the full complaints procedure →